Load data for .219 Zipper + .224 | 52gr | Speer Boat Tail Hollow Point

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 52gr \| Speer Boat Tail Hollow Point
Manufacturer SKU:	1036
Bullet Weight:	52gr \| 3.4g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.720" \| 18.3mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.427" \| 10.8mm
Shank Seated Depth:	0.340" \| 8.6mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B6059_C58
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 54 loads in caliber .219 Zipper with .224 | 52gr | Speer Boat Tail Hollow Point bullet and 27 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	87%	36289	88%	**69	97%
[Accurate 2460]*	<<locked>>	86%	37057	90%	**82	92%
Accurate 2495	<<locked>>	92%	35592	86%	**41	97%
[Accurate 2520]*	<<locked>>	92%	36941	89%	**35	93%
[Accurate 4064]*	<<locked>>	96%	32996	80%	**56	93%
Alliant AR-Comp 👍	<<locked>>	91%	36622	89%	**71	99%
Alliant Reloder-10x	<<locked>>	85%	37173	90%	**18	98%
Hodgdon H322	<<locked>>	87%	35940	87%	**89	95%
[Hodgdon H335]*	<<locked>>	83%	36869	89%	**09	94%
Hodgdon TrailBoss	<<locked>>	95%	29733	72%	**24	100%
IMR 3031	<<locked>>	96%	36448	88%	**61	96%
[Lovex D073.4]*	<<locked>>	84%	36680	89%	**56	92%
[Lovex D073.5]*	<<locked>>	86%	37057	90%	**82	92%
[Lovex D073.6]*	<<locked>>	93%	36143	87%	**18	93%
[Norma 202]*	<<locked>>	91%	35723	86%	**82	94%
ReloadSwiss RS 14	<<locked>>	95%	29544	71%	**64	100%
[ReloadSwiss RS 40]*	<<locked>>	85%	36956	89%	**79	92%
[Rottweil R 901]*	<<locked>>	88%	36187	88%	**56	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	36230	88%	**97	93%
SNPE Vectan Tubal 5000	<<locked>>	96%	36535	88%	**13	95%
[Shooters World Match Rifle]*	<<locked>>	93%	36143	87%	**18	93%
Somchem S335	<<locked>>	90%	36521	88%	**27	95%
Vihtavuori N130	<<locked>>	86%	36637	89%	**40	98%
Vihtavuori N133	<<locked>>	92%	36216	88%	**36	97%
[Vihtavuori N135]*	<<locked>>	96%	30792	74%	**58	94%
Vihtavuori N140	<<locked>>	95%	37173	90%	**89	95%
[Vihtavuori N540]*	<<locked>>	94%	36883	89%	**99	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	30110	73%	**08	95%
[Accurate 2460]*	<<locked>>	83%	33228	80%	**84	90%
[Accurate 2495]*	<<locked>>	81%	23685	57%	**77	91%
[Accurate 2520]*	<<locked>>	87%	31604	76%	**90	90%
[Accurate 4064]*	<<locked>>	91%	28297	68%	**18	91%
Alliant AR-Comp	<<locked>>	81%	26252	64%	**53	95%
Alliant Reloder-10x	<<locked>>	81%	33112	80%	**17	97%
[Hodgdon H322]*	<<locked>>	81%	29791	72%	**12	92%
[Hodgdon H335]*	<<locked>>	81%	34301	83%	**43	93%
Hodgdon TrailBoss	<<locked>>	82%	24192	59%	**80	100%
[IMR 3031]*	<<locked>>	85%	26165	63%	**36	90%
[Lovex D073.4]*	<<locked>>	82%	33881	82%	**87	90%
[Lovex D073.5]*	<<locked>>	83%	33228	80%	**84	90%
[Lovex D073.6]*	<<locked>>	89%	31053	75%	**77	90%
[Norma 202]*	<<locked>>	86%	29791	72%	**15	90%
ReloadSwiss RS 14	<<locked>>	82%	24105	58%	**23	100%
[ReloadSwiss RS 40]*	<<locked>>	81%	32053	78%	**54	90%
[Rottweil R 901]*	<<locked>>	82%	30052	73%	**82	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	83%	30081	73%	**33	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	87%	27195	66%	**48	90%
[Shooters World Match Rifle]*	<<locked>>	89%	31053	75%	**77	90%
[Somchem S335]*	<<locked>>	81%	27209	66%	**64	90%
Vihtavuori N130	<<locked>>	81%	31575	76%	**08	96%
[Vihtavuori N133]*	<<locked>>	81%	25904	63%	**31	92%
[Vihtavuori N135]*	<<locked>>	89%	24598	59%	**51	90%
[Vihtavuori N140]*	<<locked>>	87%	28761	70%	**53	90%
[Vihtavuori N540]*	<<locked>>	88%	29805	72%	**05	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.